CYTworks shared this project on Thingiverse!

Features : More air can pass through without leading the filter overpressure. Lightweight and good postion of center of weight.
Attention: Do not let child use it alone. Please do airtight test before each use.
Cut the mask evenly into 9 pieces(each 45mmX50mm if you want to get it more precisely)
Now you have more masks available. Enjoy

Download files: https://www.thingiverse.com/thing:4153462

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Shared by Kingdspc on Thingiverse:

These I print in TPU. I stretch out the hole for the balance lead a little bit with a needlenose pliers for a nice snug fit. The 4s was designed to fit most 4s 1300-1500mah lipo batteries and the 3s was designed for 3s 525mah batteries.

Download the files and learn more

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

We’ve completely refreshed the macOS version of our flagship Bluetooth LE app – Bluefruit Connect. Users of the iOS & Android versions of Bluefruit Connect will find a familiar interface and features such as:

• Info view for characteristics & services
• UART communication
• Plotter for graphing data
• Pin I/O control via firmata
• Control Pad UI
• Color Picker
• Image Transfer
• and more

Download the new Bluefruit Connect now from the Mac App Store 🎉

hackup shared this project on Thingiverse

This cartridge case is designed to fit revision 1 of the Kung Fu Flash cartridge for the Commodore 64.

For the included “key caps” to fit, use tactile switches with a height of 5 mm. The right most cap shown in the photos was printed using transparent filament. This allows it to act as an optical fiber for the internal LED on the circuit board.

A 3×16 mm self-tapping screw is required to connect both halves of the case.

download files: https://www.thingiverse.com/thing:4153414

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Shared by speedkornet on Thingiverse:

Download the files and learn more

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Deluxtuforsevn shared this project on Thingiverse!

added 2 fasteners to the bottom half of the shell to keep it tight

added another hole for a zip tie for the heater and thermistor

modified to fit JST SYP connectors to pass the front fan electrical through and not have to deal with hanging parts and wires, these are the connectors I used:

360Pcs 2.54mm JST SYP 2 Pin Female Male Red Plug Housing Crimp Pin Terminal Connector Kit-60 Set

Download files: https://www.thingiverse.com/thing:4152221

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Shared by joeg1701 on Thingiverse:

This is a 1/3 scale version of the R5-D4 Dome Antenna created for a Droid Depot R5 dome.

Download the files and learn more

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

EDSProductions shared this project on THingiverse!

In view of increasing threats from Wuhan Coronavirus spreads, infection control at domestic level become crucial in stopping community outbreak.

This 3D-printed frame comes with eye shield stencil and instruction.

You may use any transparent film available in the market to make your own eye shield yourself.

Download files: https://www.thingiverse.com/thing:4141608

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Made in NYC 3/4/2020 Featuring Adafruit Ethernet FeatherWing Selective Solder and Bonsai Buckeroo

First panel of Bonsai Buckeroo Plant Care Helper (0:06)

First panel of the new Feather Sense boards (0:12)

View inside the stencil machine of support pins (0:18)

Stencil machine aligning a panel of PCBs with a stencil (0:19)

Stencil placing support pins (1:45)

Gridlok support system activating (1:59)

Selective solder machine working on Ethernet FeatherWings (2:09)

Construction getting busy next door (2:32)

See more Made in NYC!