HOWTO : Performance tuning on Ubuntu
This tutorial can be applied to Desktop and Server. Make sure you have at least 512MB RAM on your system beofre doing so.
Step 1 :
Append the following lines at the end of the file.
Save and perform the following command.
Step 2 :
Insert the following lines just before "
Step 3 :
To do the following step is in your own risk. It works for
add "
If there is any problem or error when applying the commands, please do not reboot the system. Correct the problem or typo before reboot. Otherwise, your system cannot be reboot.
Step 4 :
You can now reboot your system if there is no error at Step 3.
That's all! See you.
Step 1 :
sudo nano /etc/sysctl.confAppend the following lines at the end of the file.
kernel.sem = 250 32000 100 128
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
# If you have more than 512MB RAM, use this setting (uncomment it and comment the setting just below)
fs.file-max = 262140
# If you have 512MB RAM or less, use this setting
#fs.file-max = 65535
vm.swappiness = 1
vm.vfs_cache_pressure = 50
vm.min_free_kbytes = 65536
net.core.rmem_default = 33554432
net.core.rmem_max = 33554432
net.core.wmem_default = 33554432
net.core.wmem_max = 33554432
net.ipv4.tcp_rmem = 10240 87380 33554432
net.ipv4.tcp_wmem = 10240 87380 33554432
net.ipv4.tcp_no_metrics_save = 1
net.ipv4.tcp_window_scaling = 1
#net.ipv4.tcp_timestamps = 1
#net.ipv4.tcp_sack = 1
#net.core.netdev_max_backlog = 5000
#net.ipv4.tcp_mem = 786432 1048576 26777216
net.ipv4.ip_local_port_range = 1024 65535
net.ipv4.tcp_max_tw_buckets = 360000
net.ipv4.tcp_max_orphans = 3276800
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_syn_retries = 2
net.ipv4.tcp_synack_retries = 2
net.core.somaxconn = 32768
net.core.netdev_max_backlog = 32768
net.ipv4.tcp_max_syn_backlog = 65536
net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_fin_timeout = 15
#net.ipv4.tcp_sack = 0
net.ipv4.tcp_orphan_retries = 2
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.all.secure_redirects = 0
net.ipv4.conf.default.secure_redirects = 0
net.ipv4.conf.all.log_martians = 1
net.ipv4.conf.default.log_martians = 1
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.all.rp_filter = 1
net.ipv4.conf.default.rp_filter = 1
net.ipv4.tcp_syncookies = 1
Save and perform the following command.
sudo /sbin/sysctl -pStep 2 :
sudo nano /etc/rc.localInsert the following lines just before "
exit 0". This requires to reboot the system to make it works.echo 1024 > /sys/block/sda/queue/read_ahead_kb
echo 256 > /sys/block/sda/queue/nr_requestsStep 3 :
To do the following step is in your own risk. It works for
ext4 only.sudo nano /etc/fstabadd "
discard,norelatime,noatime" just before "errors=remount-ro" and "defaults".If there is any problem or error when applying the commands, please do not reboot the system. Correct the problem or typo before reboot. Otherwise, your system cannot be reboot.
sudo mount -a
sudo mount -o remount /Step 4 :
You can now reboot your system if there is no error at Step 3.
That's all! See you.