Multiple Byte BPF's
If you're just beginning to use BPF's, you'll soon find you need to address fields than span more than one byte. This is very easy to do with a BPF (Berkeley Packet Filter, if you didn't read the previous post). We know we begin our filter with the protocol header we want to work with, such as tcp, ip, udp or icmp and specify the byte the field is in (starting with that byte offset, or counting from zero.) When we worked with the TCP flags field, we used tcp[13]. When we need to work with a field that spans multiple bytes, all we need to do is append a colon to that byte number and then specify how many bytes we want the filter to read. So if we wish to look at the source port field, we would write it as tcp[0:2] (the source port field resides in byte 0 and byte 1 of the TCP header). Now our filter will look at just those two bytes. To only look at packets who source port is 37, we would use the filter 'tcp[0:2] = 37'
BPF, however, has built in primitives, or keywords that apply filters, including "src" or source and "port". So if we wanted to see these packets, the easier way would be to use 'src port 37'.
Other fields have no primitive equivalent. If we needed to see all packets with a TTL greater than 64, we would specify that with a filter like this: 'ip[8:2] > 64'. We're telling tcpdump we want to start at the 8th byte offset from 0 and evaluate two bytes and show any packets that have a value in that field greater than 64.
With your protocol header charts in front of you, you can create a filter to show you any byte in any header and check it against whatever value you need.
By the way, if you're capturing packets for monitoring or auditing purposes, it's usually best to use the largest snaplength (size of each packet) that your storage space and processing power allows, and then use your filters to pull out the packets you need later.
BPF, however, has built in primitives, or keywords that apply filters, including "src" or source and "port". So if we wanted to see these packets, the easier way would be to use 'src port 37'.
Other fields have no primitive equivalent. If we needed to see all packets with a TTL greater than 64, we would specify that with a filter like this: 'ip[8:2] > 64'. We're telling tcpdump we want to start at the 8th byte offset from 0 and evaluate two bytes and show any packets that have a value in that field greater than 64.
With your protocol header charts in front of you, you can create a filter to show you any byte in any header and check it against whatever value you need.
By the way, if you're capturing packets for monitoring or auditing purposes, it's usually best to use the largest snaplength (size of each packet) that your storage space and processing power allows, and then use your filters to pull out the packets you need later.