HOWTO : nVidia CUDA with Kali Linux 1.1.0
Hardware
CPU : Intel i7-3930K
RAM : 32GB DDR3
Hard Drive : 3TB
Display Card : Two nVidia GeForce GTX 590
Install Kali
Install Kali Linux 1.1.0 on the box as usual. Make sure "secure boot" is disabled in your BIOS before installing. After that, you update the Kali accordingly.
Install nVidia Driver
Please note that Kali official does not recommend to compile applications yourself as they think that it will damage the Kali.
Install cudaHashcat
(Please noted that the current version 1.32 does not compatible to Kali 1.1.0's nVidia driver 340.x).
Test the cudaHashcat
Install John the Ripper
** If your hashes or passwords are longer than 8 characters, you need to change the following before compiling the John.
Then change from "8" to "18" or "20" and etc.
Test the John the Ripper
* since I have 4 GPUs, so the --device should be 4.
*** When you changed the CHARSET_LENGTH, you need to generate a new charset. Do it once only.
Then your cracking command will be :
Install and Test Cryptohaze
That's all! See you.
CPU : Intel i7-3930K
RAM : 32GB DDR3
Hard Drive : 3TB
Display Card : Two nVidia GeForce GTX 590
Install Kali
Install Kali Linux 1.1.0 on the box as usual. Make sure "secure boot" is disabled in your BIOS before installing. After that, you update the Kali accordingly.
apt-get update
apt-get dist-upgradeInstall nVidia Driver
apt-get install -y linux-headers-$(uname -r)
apt-get install nvidia-kernel-dkms nvidia-driver nvidia-cuda-toolkit nvidia-xconfig
nvidia-xconfig
sed 's/quiet/quiet nouveau.modeset=0/g' -i /etc/default/grub
update-grub
rebootPlease note that Kali official does not recommend to compile applications yourself as they think that it will damage the Kali.
Install cudaHashcat
mkdir hacking
cd hacking
wget http://hashcat.net/files-legacy/cudaHashcat-1.31.7z
7za x cudaHashcat-1.31.7z(Please noted that the current version 1.32 does not compatible to Kali 1.1.0's nVidia driver 340.x).
Test the cudaHashcat
cd /root/hacking/cudaHashcat-1.31/
./cudaExample0.sh
cd /root/hacking/cudaHashcat-1.31/
./cudaExample400.sh
cd /root/hacking/cudaHashcat-1.31/
./cudaExample500.shInstall John the Ripper
apt-get install libssl-dev
cd hacking
wget http://www.openwall.com/john/g/john-1.8.0-jumbo-1.tar.gz
tar -xvzf john-1.8.0-jumbo-1.tar.gz
cd john-1.8.0-jumbo-1/src
./configure
make
make** If your hashes or passwords are longer than 8 characters, you need to change the following before compiling the John.
cd john-1.8.0-jumbo-1/src
nano params.hThen change from "8" to "18" or "20" and etc.
#define CHARSET_LENGTH 8Test the John the Ripper
cd /root/hacking/john-1.8.0-jumbo-1/run
./john --device=0,1,2,3 --format=sha512crypt-cuda /etc/shadow* since I have 4 GPUs, so the --device should be 4.
*** When you changed the CHARSET_LENGTH, you need to generate a new charset. Do it once only.
wget http://downloads.skullsecurity.org/passwords/rockyou.txt.bz2
bunzip2 -d rockyou.txt.bz2
cp rockyou.txt /root/hacking/john-1.8.0-jumbo-1/run
cd /root/hacking/john-1.8.0-jumbo-1/run
cat rockyou.txt | sed 's/^/:/' > rockyou.pot
mv all.chr all.chr-original
mv alnum.chr alnum.chr-original
mv alpha.chr alpha.chr-original
mv digits.chr digits.chr-original
mv lanman.chr lanman.chr-original
./john --pot=rockyou.pot --make-charset=all.chr
./john --pot=rockyou.pot --make-charset=alnum.chr --external=filter_alnum
./john --pot=rockyou.pot --make-charset=alpha.chr --external=filter_alpha
./john --pot=rockyou.pot --make-charset=digits.chr --external=filter_digits
./john --pot=rockyou.pot --make-charset=lanman.chr --external=filter_lanmanThen your cracking command will be :
./john --pot=rockyou.pot --device=0,1,2,3 --format=sha512crypt-cuda /etc/shadowInstall and Test Cryptohaze
cd hacking
wget http://sourceforge.net/projects/cryptohaze/files/Cryptohaze-Linux_x64_1_31a.tar.bz2/download -O Cryptohaze-Linux_x64_1_31a.tar.bz2
tar xjvf Cryptohaze-Linux_x64_1_31a.tar.bz2
cd /root/hacking/Cryptohaze-Linux
./Cryptohaze-Multiforcer -h NTLM -c charsets/charsetall -f test_hashes/Hashes-NTLM-Full.txtThat's all! See you.