USB MIDI adapter with ATmega32u4
Thanks to Joonas for sharing! Read the full post here.
This article will detail how to build a USB MIDI adapter (one-directional: you connect the adapter with USB cable to your computer, and it receives notes and pedal data from your keyboard’s MIDI OUT and transmits them to your computer) with ATmega32u4, 6N137 optocoupler, a few resistors and spare MIDI connector or cable. Read on for details!
Preamble
Last year I wrote how you can turn Teensy LC into an inexpensive USB MIDI adapter. I used it to replace a non-working Chinese MIDI-USB adapter that did not send controller messages (i.e. piano pedal) properly to PC.
However, since the Teensy still costs $12, and you have to get some additional components, it doesn’t make sense to use it in a dedicated MIDI adapter, since you can get a working USB MIDI adapter for around $15 from Thomann and probably many other places.
But how about other boards? After making my Teensy LC adapter, I actually tinkered with Adafruit Pro Trinket, and got that working as well (the standard Trinket does not have hardware UART so V-USB and software UART is somewhat risky). But there is even a better board for this: The ATmega32u4 board I previously showed how it can be made into USB HID mouse. Let’s see how to turn it into a USB MIDI adapter!
from Adafruit Industries – Makers, hackers, artists, designers and engineers! http://ift.tt/2hpeEDu
via IFTTT