Sprout: Modern Indoor Self Watering Planter Powered by Arduino
Jonathanrjpereira shared this project on Instructables!
Sprout is a Modern Indoor Planter which automatically waters your plants, herbs, vegetables, etc and will revolutionize your gardening game.
It consists of an integrated water reservoir from which water is pumped & keeps the plant’s soil hydrated.
A soil moisture sensor is calibrated such that it periodically measures the moisture of the soil thereby regulating the water flow. If the soil is too dry, the water pump automatically switches ON and goes OFF when the soil moisture has reached the desired level.
If you’re the person who underwaters their plants, Sprout will ensure you will never have to worry about being a bad gardener again. And if you’re the sort of person who overwaters their plants to compensate for absenteeism, it means your not in danger of drowning your plants or seeds.
Sprout’s water reservoir capacity is around 500 ml / 17 fl oz, which allows you to neglect your plants for as long as a month before it needs a refill.
Electronic Components Required:
- 1x Arduino Nano/ Arduino Pro Mini
- 1x DC Water Pump 12V or 9V
- 1x Soil Moisture Sensor
- 1x LM7805 Voltage Regulator
- 1x IRF540 MOSFET
- 1x 220 Ohm Resistor
- 1x IN4001 Diode
- 1x Header Pins Strip
- 1x 2-Pin Screw Terminal
- 1x DC Power Jack (Male + Female)
- Optional: 1x HC-05 Bluetooth Module
from Adafruit Industries – Makers, hackers, artists, designers and engineers! http://ift.tt/2BB8Jja
via IFTTT
