NEW PRODUCTS – Arcade Button and Switch Quick-Connect Wires – 0.187″ + 0.25″ (10-packs)

3835 iso ORIG 2018 08

NEW PRODUCTS – Arcade Button and Switch Quick-Connect Wires – 0.187″ + 0.25″

Quick connector wire sets make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a ‘pair’ with two quick-connects pre-crimped. The wires are terminated together in a JST 2.5mm 2-pin connector. This connector will fit in 0.1″ headers, so it’s breadboard compatible or you can stick two wires into the end. Of course, you can chop this off if there’s no use for it.

If you need a connector for the other side, try this JST XH (matching part from Digi-Key here)

First up, Arcade Button and Switch Quick-Connect Wires – 0.187″

We’ve found these work with our:

Massive Arcade Buttons (switch contacts only)
Large Arcade Buttons (switch contacts only)
Micro Switches (Except for #820, the one with the long wire)

But they are not compatible with the LED contacts Massive and Large Arcade buttons. For those, you’ll want the 0.25″ Arcade/Button Quick-Connect Wire Pairs. We also have 0.11″ Quick-Connects.

We’ve also noticed that while these are the right size, they may be a little loose on some switches. You can crimp them a little more with a pair of pliers to get a better grip!

Now for the 0.25″

We’ve found these work best with our:

Massive Arcade Buttons (will fit both the LED and switch contacts)
Large Arcade Buttons(will fit both the LED and switch contacts)
Micro Switch with Wire

But they are not compatible with our smaller LED and mini arcade and buttons. For those, you’ll want either the 0.11″ Quick-Connect Wire pairs or the 0.187″ Quick-Connect Wire pairs.