NEW PRODUCT – Mini SWD 0.05″ Pitch Connector – 10 Pin SMT Box Header
NEW PRODUCT – Mini SWD 0.05″ Pitch Connector – 10 Pin SMT Box Header
We’ve carrying a new 1.27mm pitch 2×5 Mini SWD 0.05″ Pitch Connector. It’s a tinier, bite-sized version of the Box Header used on our SWD Cable Breakout Board. Instead of a full shroud, there’s a half-shroud with a key-notch. It’ll takes a lot less space on your board!
The header alone is great if you want to incorporate this piece of hardware with your own software. We’re specifically selling it so you can solder it onto our nRF52 Feather to add SWD debug/connect capabilities. If your project requires, you could also straighten out the SMT pins to solder into a thru-hole connector.
This little header will snap right into any 10-pin 2×5 socket-socket 1.27mm IDC (SWD) cable. In conjunction with these cables, they are handy when programming or debugging tiny boards. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box.
One header per order!
