Open Source FTDI FT2232 JTAG and UART Adapter #FTDI #USB @McuOnEclipse

Erich on the MCU on Eclipse blog writes about an open source FTDI FT2232 JTAG and UART adapter board.

In JTAG Debugging the ESP32 with FT2232 and OpenOCD I have used a FTDI FT2232 breakout board to JTAG debug with OpenOCD. With an adapter board on top of the TDI FT2232 the wiring is much easier and simpler to use.

The wiring includes a JTAG header with pull-up and pull-down plus an UART header:

The KiCAD project and files are available on this GitHub site.

See the post for additional details on this build.