New Products 1/8/2020 Featuring #Adafruit Mini #PiTFT 1.3″ – 240×240 TFT Add-on for #RaspberryPi! @Adafruit #newproducts

IScreen Shot 2018 05 04 at 7 44 26 AM 1 png 1

Browse through all that’s new here!


NEW PRODUCTS THIS WEEK


Adabox logo black

AdaBox: Curated Adafruit products, unique collectibles, and exclusive discounts. All delivered quarterly. Make outside the box!
Subscribe now or give AdaBox to a friend.

Read more


4500 05

Adafruit CLUE – nRF52840 Express with Bluetooth LE: Coming soon…sign up to be notified when we fabricate the first batch!

We wanted to build some projects that have a small screen and a lot of sensors. This board has a 1.3″ 240×240 IPS TFT display, two buttons, and a ton of sensors:

  • LSM series 9-DoF motion – LSM6DS33 Accel/Gyro + LIS3MDL magnetometer
  • APDS9960 Proximity, Light, RGB, and Gesture Sensor
  • PDM Microphone sound sensor
  • Humidity, temperature and barometric environmental sensing

Read more


4485 00

Adafruit LSM6DS33 + LIS3MDL – 9 DoF IMU with Accel / Gyro / Mag – STEMMA QT Qwiic: Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9 Degree of Freedom (9-DoF) sensor with sensors from ST. This little breakout contains two chips that sit side-by-side to provide 9 degrees of full motion data.

Read more


4478 00

OpenMV Cam H7 – MicroPython Embedded Vision + Machine Learning: The OpenMV Cam is like a super powerful microcontroller board with a camera on board that you program in MicroPython. It’s easy to run machine visions algorithms on what the OpenMV Cam sees so you can track colors, detect faces, and more in seconds, and thanks to the embedded functionality, you can then control I/O pins in the real-world.

Read more


4470 01

Adafruit MCP4728 Quad DAC with EEPROM – STEMMA QT / Qwiic: Coming Soon! If you’ve ever said to yourself, “Gee, I wish I had four 12-bit DACs that came in a single package with the ability to save their settings to an EEPROM”, well I have good news. The MCP4728 is the answer to your wishes! Within its little package, the MCP4728 has four 12-bit DACs for whatever voltage setting needs you may have. In addition, it has the ability to store the settings for the DACs to an internal EEPROM. Once saved to the internal non-volatile memory, the settings will be loaded by default when the DAC powers up. All over I2C!

Read more


4447 01

Premium Silicone Covered Female-Female Jumper Wires – 200mm x 40: These premium female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They’re 200mm (~7.8″) long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit black). They have 0.1″ female header contacts on either end and fit cleanly next to each other on standard-pitch 0.1″ (2.54mm) header.

These jumper wires are a little more expensive than most because they use silicone covered wires, they’re a little more durable and they’re more heat-resistant than standard PVC covered wires.

Read more


4436 05

DIN Rail 2×8 IDC to Terminal Block Adapter Breakout: This one’s going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2×8 IDC cable to this very PCB, which can be DIN rail-mounted. Then, all 16 pins are broken out into terminal blocks, so you can connect and power your sensors, displays, microcontrollers, etc.

Read more


4435 03

DIN Rail Generic PCB Holder – 50x80mm: It’s pretty simple, so not much to say about it. You have a DIN railing, you want to attach something to it? Maybe it fits in a 50mm x 80mm rectangle? This will do the job. Its easy to assemble in a minute or less. To install onto a DIN rail, attach the yellow plastic lock to the bottom of the holder and snap in once you have it positioned how you like. The plastic casing is easy to machine, drill or cut.

Read more


4434 01

RJ12 Jack Connectors – EV3/NXT LEGO Compatible – Pack of 10: If you have any LEGO Mindstorm or EV3 sensors/motors/controllers you probably noticed the phone-cable-like connectors that are used to go from accessories to controller boards. However, you can’t use every-day phone jacks or cables because the little plastic clip is on the sidenot the center. No need to give up your dreams of interfacing with NXT parts, though! These jacks are just the right type to let you plug in those cables and expose the 6 wires.

Read more


4403 00

Small -15 to +15V DC Analog Panel Meter: Analog panel meters are arguably not as blingy or flashy as LEDs, but their simplicity adds a touch of elegance and makes them easier to read quickly.

This Small -15V to +15V Panel Meter is about handheld-size, with three screws to open up the panel and replace the backing paper, if you like. It’s great for analog projects that have a split power supply or large voltage swings.

Read more


4404 03

Small -1 Amp to +1 Amp DC Current Analog Panel Meter: Analog panel meters are arguably not as blingy or flashy as LEDs, but their simplicity adds a touch of elegance and makes them easier to read quickly.

This Small -1 Amp to +1 Amp DC Current Analog Panel Meter is handheld-size, with three screws to open up the panel and replace the backing paper, if you like.

Read more


right:auto;” src=”https://ift.tt/2QKmkPN” alt=”4395 02″ title=”4395-02.jpg” border=”0″ width=”852″ height=”640″ />

Micro SD Card PCB Extender: Stop fiddling with micro SD card sockets in the back of your latest gadget during development, and give yourself a little more elbow room with this Small Micro SD Card Extender. This is a great hack for length constraints with 3D printers, single-board computers, data-logging kits and more. Get to your micro SD card in and out without using your fingernails!

Read more


4484 01

Adafruit Mini PiTFT 1.3″ – 240×240 TFT Add-on for Raspberry Pi: The Adafruit Mini PiTFT – 1.3″ 240×240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi computers, to give you a little display. The Mini PiTFT comes with a full color 240×240 pixel IPS display with great visibility at all angles. The TFT uses only the SPI port so its very fast, and we leave plenty of pins remaining available for buttons, LEDs, sensors, etc. It’s also nice and compact so it will fit into any case.

Read more

New Products 1/8/2020 Featuring #Adafruit Mini #PiTFT 1.3″ – 240×240 TFT Add-on for #RaspberryPi!

Stay in the loop at Adafruit.com/New!

NewImage 43 1

Want to get this info beamed straight into your inbox?

New nEw NEWs From Adafruit is an email newsletter sent once a week to subscribers only.

It features new products, special offers, exciting original content, and more.

Sign-up for the Adafruit weekly Newsletter here: https://www.adafruit.com/newsletter



from Adafruit Industries – Makers, hackers, artists, designers and engineers! https://ift.tt/30aZOCV
via IFTTT